13
·
Hot Key
1.
SP key: EDM Settings
When you are not inputting numbers or alphabets, press SP key, a shortcut screen will be showed. Press ▲▼ key
to move the cursor, press
◀▶
key to switch the setting. Press ENT to save the settings, press ESC to quit to upper
menu.
Laser Pointer
：
OFF
←→
Plummet Brightness
：
2
←→
Crosshair Illumination
：
0
←→
Prism Constant
：
-30 mm
Mode
：
Fine ” s”
Reflector: Prism
Laser Pointer ON/ OFF
0 is off, 1-4 choose brightness
0 is off, 1-4 chosose brightness
Only works under Prism Mode
Choose from single/3 times/ Rept./ Tracking
Choose from Prism/ Non-Prism/ Sheet
Note:
1)
When you press SP to enter the above menu, laser plummet will be ON. Press ESC to quit, laser Plummet will
be OFF.
2.
SFT +
·
: Compensator ON/ OFF
When you are not inputting numbers or alphabets, press SFT key, then press
·
, compensator screen will be
showed.
Meas
.
PC -30
PPM 0
3
ZA 92°36′25″
HAR 120°30′10″
P1
SD SHV HSET EDM
Tilt sensor [ XY ON]
OFF X-ON XYON DIGIT
3.
SFT + +/- : Laser Pointer and Laser Plummet
F1: Turn on Laser Pointer F2: Turn off
↑ and ↓: change the brightness of Laser Plummet point
·
Trigger Key
Under any measurement screen, you can press trigger key to perform a distance/ coordinate measurement.
