141
Operating Procedure
Operation
Display
⑴
Select “2. Known data” in the “Memory
Mode Screen” and press ENT to show the
“Known Point Menu Screen”.
“2. Known
data”
+
ENT
1. Key in coord
2. coord import
3. coord export
4. comms input
5. comms output
6. clear
⑵
Select “4. Comms input” and press ENT,
the “Data Format Display Screen” is
displayed. Press ENT again, start data
reception. The received data amount is showed
on the bottom of the screen.
“4.Comms
input”
+
ENT
Comms input
Transfer: USB
Job: A:\COORD. PTS
Receiving
STOP
⑷
Data input finished, display returns toknow
data screen.
1. Key in coord
2. coord import
3. coord export
4. comms input
5. comms output
6. clear
☆
Note
：
Before performing communication between KTS and other equipments, make sure that their
communication parameters should be equal.
（
Refer to “23.1 Changing Instrument Parameters”
）
20.2.5 Sending known point data to computer
Operation Procedure
Key
Display
⑴
Under memory mode choose “2. Known
data”and press ENT to enter known point screen.
“2. Known
data”
+
ENT
1. Key in coord
2. coord import
3. coord export
4. comms input
5. comms output
6. clear
⑵
Choose“5. Comms output”and press
ENT.The machine starts sending known
data,then sending data amount shows in the
bottom of the screen.
5. comms
output
+
ENT
Comms output
Transfer: USB
Job: A:\COORD. PTS
Sending
STOP
⑷
Data output finished, display returns toknow
data screen.
1. Key in coord
2. coord import
3. coord export
4. comms input
5. comms output
6. clear
