Kohler Comand Pro CH1000, Service Manual

Page: 125 / 142

10.15
Section 10
Reassembly
10
3. Install new plugs and torque to 24.4-29.8 N·m
(18-22 ft . lb.) . See Figure 10-58.
Figure 10-58. Installing Spark Plugs.
Install Oil Filter Adapter
1. Make sure all sealing surfaces are clean and the
three dowel pins are in place on the crankcase
adapter surface. Carefully install a new O-ring
around each of the dowel pins. Then install three
new O-rings onto the dowel pins of the oil
fi lter
adapter. See Figure 10-59.
O-rings O-rings
O-rings O-rings
Crankcase
Adapter
Figure 10-59. Installed O-rings on Crankcase and
Oil Filter Adapter.
2. Install the oil fi lter adapter onto the crankcase.
Install and torque the M8 capscrew to 24.4 N·m
(216 in. lb.) . See Figure 10-60.
Mounting
Screw
Oil Filter
Adapter
Figure 10-60. Torquing Oil Filter Adapter.
Install Intake Manifold
1. Install new intake manifold gaskets so the
notched section is inward and points toward the
fl ywheel side. See Figure 10-61.
Notches
Figure 10-61. Installed Intake Manifold Gaskets.