Kohler Comand Pro CH1000, Service Manual

Page: 87 / 142

8.7
Section 8
Disassembly
8
Spring
Valve
Cup
Figure 8-24. Rubber Valve and Spring Removed
from Cup.
2. Remove the screw securing the oil fi lter adapter
and individual O-rings to the crankcase, then
carefully separate the parts. See Figure 8-25.
Adapter
Mounting
Screw
Mounting Mounting
Screw
Screw
Adapter
Figure 8-25. Removing Oil Filter Housing Adapter.
Remove Ignition Modules
1. Rotate the fl ywheel so the magnet is away from
the modules.
2. Remove the mounting screws and disconnect
the kill lead from the ignition modules. Note the
position of ignition modules. See Figure 8-26.
Ignition
Modules
Figure 8-26. Removing Ignition Modules.
Remove Grass Screen and Cooling Fan
1. Remove the screws, a tt aching hardware and hex
studs securing the grass screen, sti ff eners and
cooling fan to the fl ywheel. See Figures 8-27, 8-28
and 8-29.
Figure 8-27. Removing Grass Screen Fasteners.
Figure 8-28. Removing Mounting Studs.