Kohler Comand Pro CH1000, Service Manual

Page: 20 / 142

2.2
Section 2
Tools & Aids
Tools (cont.)
Description Source/Part No.
Flywheel Strap Wrench
To hold fl ywheel during removal.
SE Tools KLR-82409
Hydraulic Valve Li ft er Tool
To remove and install hydraulic li ft ers.
Kohler 25 761 38-S
Ignition System Tester
For testing output on all systems, except CD.
For testing output on capacitive discharge (CD) ignition system. Kohler 25 455 01-S
Kohler 24 455 02-S
O ff set Wrench (K & M Series)
To remove and reinstall cylinder barrel retaining nuts.
SE Tools KLR-82410
Oil Pressure Test Kit
To test and verify oil pressure.
Kohler 25 761 06-S
Recti fi er-Regulator Tester (120 volt current)
Recti fi er-Regulator Tester (240 volt current)
Used to test recti fi er-regulators.
Kohler 25 761 20-S
Kohler 25 761 41-S
Individual Components Available
CS-PRO Regulator Test Harness
Special Regulator Test Harness with Diode Design Technology Inc.
DTI-031
DTI-033
Spark Advance Module (SAM) Tester
To test the SAM (ASAM and DSAM) on engines with SMART-SPARK
™.
Kohler 25 761 40-S
Starter Brush Holding Tool (Solenoid Shi ft )
To hold brushes during servicing.
SE Tools KLR-82416
Starter Retaining Ring Tool (Inertia Drive)
To remove and reinstall drive retaining rings (excluding FASCO starters).
Kohler 25 761 18-S
Starter Servicing Kit (All Starters)
To remove and reinstall drive retaining rings and brushes.
SE Tools KLR-82411
Individual Component Available
Starter Brush Holding Tool (Solenoid Shi ft )
SE Tools KLR-82416
Tachometer (Digital Inductive)
For checking operating speed (RPM) of an engine.
Design Technology Inc.
DTI-110
Vacuum/Pressure Tester
Alternative to a water manometer.
Kohler 25 761 22-S
Valve Guide Reamer (K & M Series)
For sizing valve guides a ft er installation.
SE Tools KLR-82413