8-6
TOS9213S/ TOS9213AS
8.2
Starting a Test
Screen settings
■
TOS6200
On the TOS6200, display the Test Condition Settings screen (MAIN).
The tester forcibly shifts the TOS6200 to the Test Condition Settings screen
(MAIN).
■
TOS9213S/ TOS9213AS
On the tester, display the Program screen (AUTO).
(To display the Program screen (AUTO), press the AUTO key.)
Checking the TOS6200 status
Confirm that the TOS6200 is in the READY status. In the READY status, the
TOS6200 displays “READY” at the top right of the screen.
Unless the TOS6200 is in the READY status, the tester is unable to control the
TOS6200.
Key-locking the TOS6200
If the LOCAL key is pressed on the TOS6200 while it is running a program, the
tester enters the LOCAL mode and the test is suspended.
To prevent such an occurrence, it is recommended that the tester be key-locked. To
lock the panel settings, press the SHIFT + LOCAL/KEY LOCK keys.
On the panel, only the START switch and the STOP switch are valid. During key-
lock, “KEY LOCK” appears on the LCD.
To cancel the key-lock function, press the SHIFT + LOCAL/KEY LOCK keys.
Starting/suspending a test
To start a test, use the START switch on the tester.
To suspend a test, use the STOP switch on the tester.
If the STOP switch on the tester fails to stop the TOS6200 due to a communication
error between the tester and the TOS6200, also press the STOP switch on the
TOS6200 to suspend the test.
