Kenwood TK-2170 SERIES, Function Reference

Page: 55 / 142

14 CONVENTIONAL GROUP
FUNC (K)/Ver. 1.01 Confidential
Contents Index
43
14.2.14 Scan Add
Scan Add can be used to add a channel to the Scan List.
Scan Add can be configured by using KPG-101D.
„ Configuration using KPG-101D
• Configuring the Scan Add (Refer to FPRG 6.4.16
Scan Add.)
14.2.15 Beat Shift
Beat Shift eliminates internal harmonics caused by the
transceiver’s oscillators.
(Refer to 1.8 Beat Shift on page
5.)
Beat Shift can be configured to be enabled or disabled by
using KPG-101D.
„ Configuration using KPG-101D
• Configuring the Beat Shift to be enabled or
disabled for each channel (Refer to FPRG 6.4.17
Beat Shift.)
14.2.16 Compander
Compander can be used to improve the quality of the
received audio.
(Refer to 1.7 Compander on page 5.)
Compander can be configured to be enabled or disabled
by using KPG-101D.
„
Configuration using KPG-101D
• Configuring the Compander to be enabled or
disabled for each channel (Refer to FPRG 6.4.18
Compander.)
14.2.17 Data
A channel can be configured to be used for data
communications or voice communications. If the
Data
checkbox is checked, the channel is used for data
communications.
Data can be configured by using KPG-101D.
„ Configuration using KPG-101D
• Configuring the Data (Refer to FPRG 6.4.19
Data.)
14.2.18 Voice Scrambler
Voice Scrambler can be used to scramble speech to
allow users to engage in private communications.
(Refer
to 26 Voice Scrambler on page 124.)
Voice Scrambler can be configured to be enabled or
disabled by using KPG-101D.
„ Configuration using KPG-101D
• Configuring the Voice Scrambler (Refer to FPRG
6.4.20 Voice Scrambler.)
14.2.19 Scrambler Code
Scrambler Code can be configured. (Refer to 26 Voice
Scrambler on page 124.)
Two types of scrambler are available. The transceiver
can be configured to use a built-in scrambler or an
optional scrambler to be installed in the transceiver. As
for Scrambler Code configuration, a user can configure
the Scrambler Code that may be required for the optional
scrambler board.
Scrambler Code can be configured by using KPG-101D.
Note: Scrambler Code cannot be used with a built-in scrambler.
„ Configuration using KPG-101D
• Configuring the Scrambler Code (Refer to FPRG
6.4.21 Scrambler Code.)