21 SCAN
FUNC (K)/Ver. 1.01
Confidential
109
21.3 List Scan (TK-3173 only)
List Scan can be used to scan all Zone-CH/GIDs added in
the Scan List Table.
The following CH/GIDs can be scanned:
•
A CH/GID in a Zone that Scan Add is selected in Scan
List Table by using KPG-101D
•
A CH/GID added to the Scan List with the
Scan
Delete/Add
key
The transceiver always scans Priority Channel even if the
Priority Channel is not configured in the target zone when
a Priority Channel is configured.
“List” must be selected from the
Scan Type
to enable List
Scan.
Transceiver Operation
z
Starting the Scan
1.
Press the
Scan
key.
The transceiver starts scanning.
“SCAN n” and the “
” icon appear on the
display. The zone number configured for the
Scan List can be entered in “n”.
z
Exiting from Scan Mode
1.
Press the
Scan
key while the transceiver is
scanning.
The “
” icon disappears and the transceiver
finishes scanning.
Configuration using KPG-101D
•
Configuring the Scan Type (Refer to FPRG 6.9.8
Scan Type.)
•
Assigning functions to the
PF
keys (Refer to
FPRG 6.8 Key Assignment.)
21.4 Priority Scan
Priority Scan can be used to scan the high priority
channels regardless of the configuration in each channel.
The transceiver monitors the Priority Channel with
Lookback even if the transceiver is receiving a normal
channel using Single Scan, Multi Scan or List Scan when
a Priority Channel is configured.
The transceiver scans the Priority Channel in the
following conditions:
•
When Priority Channel is in a different Zone from the
scanning Zones while executing the Single Scan.
•
When Priority Channel is in a different Zone from the
scanning Zones while executing the Multi Scan.
•
When Priority Channel is in a different Zone from the
scanning Zones configured with the Scan List Table
while executing the List Scan.
The transceiver scans Priority Channels with the cycle
configured in the
Lookback Time A
or
Lookback Time B
edit box in the
Scan Information
window when the
transceiver executes Single Scan, Multi Scan or List Scan.
Priority Channel can be configured in the following ways
by using KPG-101D.
Table 21-5 Priority Scan Operation
Note:
Lookback can be used to monitor the presence of a
signal on the Priority Channel while receiving a call on a
normal channel during the Priority Scan.
The Group ID in Trunking System cannot be configured
for Priority Channel.
The transceiver does not look back to the Priority
Channel while the transceiver pauses scanning in
Trunking System.
Priority Scan
Operation
Fixed
The channel configured by KPG-101D is
configured as Priority Channel.
Selected
The transceiver scans the selected channel as
Priority Channel.
Priority Channel cannot be configured by using
KPG-101D.
Operator
Selectable
The transceiver scans channels configured by a
user as Priority Channel. Priority Channel can
be changed in Priority-channel Configuration
Mode when the
Scan
key is pressed and held
for 2 seconds.
