Kenwood TK-2170 SERIES, Function Reference

Page: 128 / 142

22 EMERGENCY MODE
116
Index Contents
Confidential FUNC (K)/Ver. 1.01
22.1.5 Transmit Duration
Transmit Duration is the duration for a single transmission
in Emergency Mode.
The transceiver returns to Emergency Automatic
Reception Mode when Transmit Duration elapses after
the transceiver starts Automatic Transmission in
Emergency Mode.
The Transmit Duration can be configured by using KPG-
101D.
„ Configuration using KPG-101D
• Configuring the Transmit Duration (Refer to FPRG
6.14.5 Transmit Duration.)
22.1.6 Duration of Locator Tone 2
Duration of Locator Tone 2 is the alert tone beeping
before automatic reception begins in Emergency Mode.
This tone sounds when the transceiver alternates
between transmit and receive in Emergency Mode.
A user can easily recognize that the transceiver is about
to receive an Emergency when the Tone sounds. The
dispatcher can use this tone to locate a user who is in an
emergency situation.
Duration of Locator Tone 2 can be configured by using
KPG-101D.
„ Configuration using KPG-101D
• Configuring the Duration of Locator Tone 2 (Refer
to FPRG 6.14.6 Duration of Locator Tone 2.)
22.1.7 Receive Duration
Receive Duration is the duration for a single reception in
Emergency Mode.
The transceiver returns to Emergency Automatic
Transmission Mode when the Reception Duration
elapses after the transceiver starts Automatic Reception
in Emergency Mode.
The Receive Duration can be configured by using KPG-
101D.
„ Configuration using KPG-101D
• Configuring the Receive Duration (Refer to FPRG
6.14.7 Receive Duration.)
22.1.8 Emergency Display
The information that is shown on the display in
Emergency Mode can be configured.
Emergency Display can be configured in the following
way by using KPG-101D.
Table 22-3 Emergency Display Operation
Note: Icons do not appear while in Emergency Mode.
„ Configuration using KPG-101D
• Configuring the Emergency Display (Refer to
FPRG 6.14.8 Emergency Display.)
22.1.9 Emergency Text
Emergency Text shown on the display can be configured
if “Text” is selected from the
Emergency Display
dropdown list.
Text to be displayed can be configured by using
KPG-101D.
„ Configuration using KPG-101D
• Configuring the Emergency Text (Refer to FPRG
6.14.9 Emergency Text.)
Emergency Display Operation
Selected
The previous selected CH/GID
appears even if the transceiver
enters Emergency Mode.
Text
A pre-programmed message
configured for the Emergency Text
appears on the display when the
transceiver enters Emergency
Mode.