FUNC (K)/Ver. 1.01
Confidential
19
4 SOUNDS
4.1 Tone Pattern
Following tones can be configured for the transceiver.
Table 4-1 Tone List
4.1.1 Power-on Tone
The transceiver emits this tone when the transceiver is
turned ON.
Table 4-2 Power-on Tone List
4.1.2 Control Tone
The transceiver emits this tone when a function activates.
Table 4-3 Control Tone List
Tone Type
Description and
Tone Names
Power-on Tone
This tone notifies a user that the
transceiver is turned ON.
• Power-on Tone
Control Tone
The transceiver emits this tone when
the transceiver operates.
• Key Beep A
• Key Beep B
• Key Beep C
• Key-entry Error Tone
• Rollover Tone
• Password Authorization Tone
• Queue Tone
• Free System Ringback Tone
• System Search Mode Tone
• Ringer Tone
• Priority Channel Tone
• Scan Stop Tone
• Free Channel Tone
• Individual Call Tone
• Fleet Call Tone
• Group Call Tone
Warning Tone
The transceiver emits this tone to
warn a user.
• Warning Tone A
• Warning Tone B
• Warning Tone C
• TOT Pre-alert Tone
• Battery Warning Tone
• PLL Unlock Tone
• Busy Tone
• Man-down Pre-alert Tone
• Delay Tone
• Intercept Tone
• Deny Tone
• System Search Tone
• System Search End Tone
• Data Send Error Tone
Locator Tone
The transceiver emits this tone when
the transceiver starts or finishes an
automatic transmission in
Emergency Mode.
• Duration of Locator Tone 1 to
Duration of Locator Tone 2
Sidetone
The transceiver emits this tone when
communication is established or the
transceiver finishes transmitting.
• PTT Proceed Tone
• VOX Proceed Tone
• PTT ID Sidetone
• Sidetone (DTMF)
• Sidetone (2-tone)
Alert Tone
The transceiver emits this tone when
the transceiver receives a call or
message.
• Alert Tone 1 to Alert Tone 8
Function
Description
Power-on Tone
The transceiver emits this tone when
the transceiver is turned ON.
Function
Description
Key Beep A
The transceiver emits this tone when
a function is enabled by pressing a
key.
Key Beep B
The transceiver emits this tone when
a function is disabled by pressing a
key.
Key Beep C
The transceiver emits this tone when
data, such as DTMF Memory or a
Test Mode adjustment value, is
written to the transceiver by pressing
a key.
Key-entry Error Tone
The transceiver emits this tone when
the operation activated by pressing a
key is denied. The transceiver emits
this tone if an inoperable key is
pressed in Selcall Entry or OST
Select Mode.
Rollover Tone
The transceiver emits this tone when
the smallest zone number or CH/
GID is selected.
Password Authorization
Tone
The transceiver emits this tone if the
password matches.
Queue Tone
The transceiver emits this tone while
the transceiver searches for an
available RIC repeater using Auto
Telephone in LTR Trunking System.
The transceiver keeps emitting this
tone until Auto Telephone is
disabled due to not finding an
available RIC repeater within 60
seconds.
Free System Ringback
Tone
The transceiver emits this tone if the
transceiver enters Free System
Ringback Mode in LTR Trunked
System.
System Search Mode
Tone
The transceiver emits this tone if the
transceiver enters System Search
Mode in LTR Trunked System.
