20 FLEETSYNC
FUNC (K)/Ver. 1.01
Confidential
95
20.5.3 Long Message on
Data Zone-CH/GID
This function allows the transceiver to automatically
change the channel to the Data Zone-CH/GID to send a
Long Message.
The transceiver returns to the previous Zone-CH/GID
when the transceiver finishes sending the Long Message.
This function can be used to send data using a specific
channel.
Long Message on Data Zone-CH/GID can be configured
to be enabled or disabled by using KPG-101D.
Configuration using KPG-101D
•
Configuring the Long Message on Data Zone-CH/
GID (Refer to FPRG 6.12.3 Parameter Tab - Long
Message on Data Zone-CH/GID.)
20.6 Stack
Received Selcalls, Status Messages and Short
Messages are stored in Stack Memory. A user can
confirm or delete the messages by operating the
transceiver.
Transceiver Operation
z
Confirm the message.
1.
Press and hold the
Selcall
,
Status
or
S Status
key for 1 second.
The transceiver enters Stack Mode.
2.
Select the message to be checked.
•
Using the
PF
keys
Press the
[<B]
or
[C>]
key to increment or
decrement the Stack List number.
•
Using the
Selector
*1
Turn the
Selector
clockwise to increment
the Stack List number.
Turn the
Selector
clockwise to decrement
the Stack List number.
*1
If the List Selection Key (Selector) is enabled.
Stack Number Display
ID Name Display (Caller ID)
3.
Confirm the message.
The message appears on the display.
•
Selcall
The Name configured for the received ID
List and Stack number are displayed
alternately.
The Code and Stack number appear
alternately if the Name is not configured.
