Kenwood TK-2170 SERIES, Function Reference

Page: 64 / 142

15 LTR TRUNKING
52
Index Contents
Confidential FUNC (K)/Ver. 1.01
15.4.2 Auto Telephone Search
Auto Telephone Search can be used to search for an
available RIC repeater and automatically connect to the
repeater.
The transceiver automatically searches for an available
telephone line to make a call. This function is similar to
the memory function of a mobile phone, allowing a user to
easily make a call.
Zones satisfying the following conditions are searched. If
no zone matches the following conditions, the transceiver
emits the Deny Tone and does not activate Auto
Telephone Search:
• At least 1 zone is in the Auto Telephone Search list.
• There is a RIC repeater in the above zone.
• There is a GID having the LTR ID configured as the
Encode ID used to connect to a phone line in the
above zone.
„
Transceiver Operation
1. Select the phone number to call with Autodial.
(Refer to 18 DTMF on page 63.)
2. Press the Side 2 key.
“AUTO TEL” appears on the display and the “ ”
icon blinks.
The transceiver starts executing the Auto
Telephone Search.
The “ ” icon stops blinking when the transceiver
establishes a link to the phone line.
If a transceiver cannot establish a link to the phone
line within 60 seconds, the transceiver emits the
Deny Tone and Auto Telephone Search ends.
„ Configuration using KPG-101D
• Assigning functions to the
PF keys (Refer to
FPRG 6.8 Key Assignment.)
• Configuring the Auto Telephone Search (Refer to
FPRG 6.3.16 Auto Telephone Search.)
• Configuring the Auto Telephone (Refer to FPRG
6.10.1 Encode Tab - Auto Telephone.)
15.4.3 Free System Ringback
Free System Ringback can be used to make the
transceiver emit a tone if a repeater is available.
A user can use this function if they want to be notified that
a repeater is available when all repeaters are busy.
Free System Ringback can be configured to be enabled
or disabled by using KPG-101D.
„ Transceiver Operation
1. Release the PTT switch while the transceiver is
emitting a Busy tone.
The transceiver emits the Free System Ringback
Mode Tone and enters Free System Ringback
Mode.
The transceiver emits the Ringer Tone when a
repeater is available.
Note:
 Free System Ringback can be used to make a phone call. Free
System Ringback does not activate for Dispatch purposes.
 The transceiver stops executing Free System Ringback when
the Zone or Group ID is changed or the transceiver is receiving a
call.
 The transceiver pauses scanning when the transceiver enters
Free System Ringback Mode during the scan. The transceiver
resumes scanning after the transceiver exits from Free System
Ring Back Mode.
„ Configuration using KPG-101D
• Configuring the Free System Ringback (Refer to
6.7.4 Trunking Tab - Free System Ringback.)