Kenwood TK-2170 SERIES Function Reference Download

Page: 25 / 142

2 BASIC OPERATION

FUNC (K)/Ver. 1.01

Confidential

Contents

Index

Transceiver Operation

Select a Zone-Group ID to be used.

(Refer to 2.4

Changing the Zone on page 9, 2.5 Changing the
CH/GID on page 9.)

Keep pressing the

PTT

switch.

Speak into the microphone after the transceiver
establishes a link to a repeater.

Release the

PTT

switch.

The transceiver enters receiving mode.

Configuration using KPG-101D

•

Configuring the Transmit Frequency (Refer to
FPRG 6.5.4 Transmit Frequency.)

•

Configuring the Encode ID (Refer to FPRG 6.6.3
Encode ID.)

2.11 Transmitting with

Talk Around

This function allows a user to communicate with another
transceiver without using a repeater.

(Refer to 11 Talk

Around on page 34.)

2.11.1 Conventional Group

Transceiver Operation

Select a Zone-channel to be used.

(Refer to 2.4

Changing the Zone on page 9, 2.5 Changing the
CH/GID on page 9.)

Press the

Talk Around

key.

Press the

PTT

switch.

The transceiver transmits on the Receive
Frequency and sends the Receive QT/DQT
instead of transmitting on the Transmit Frequency
and sending the Transmit QT/DQT.

2.11.2 Trunking System (TK-3173 only)

Transceiver Operation

Select a Talk Around Group to be used.

Press the

PTT

switch.

The transceiver transmits on the Receive
Frequency instead of on the Transmit Frequency.
An Encode ID is used as the Transmit ID.

Summary of Contents for TK-2170 SERIES















































































































































Search results

Summary of Contents for TK-2170 SERIES

Reviews:

Related manuals for TK-2170 SERIES

Brands by name

Popular brands

Kenwood TK-2170 SERIES, Function Reference

Search results

Summary of Contents for TK-2170 SERIES

Reviews:

Related manuals for TK-2170 SERIES

Brands by name

Popular brands