Kenwood TK-2170 SERIES, Function Reference

Page: 62 / 142

15 LTR TRUNKING
50
Index Contents
Confidential FUNC (K)/Ver. 1.01
15.2.11 Data
A Group ID can be configured to be used for data
communications or voice communications by using KPG-
101D.
„ Configuration using KPG-101D
• Configuring the Data (Refer to FPRG 6.6.14
Data.)
15.2.12 Scrambler
Voice Scrambler can be used to scramble speech to
allow users to communicate in private.
(Refer to 26 Voice
Scrambler on page 124.)
Voice Scrambler can be configured to be enabled or
disabled by using KPG-101D.
„ Configuration using KPG-101D
• Configuring the Voice Scrambler (Refer to FPRG
6.6.15 Voice Scrambler.)
15.2.13 Scrambler Code
The Scrambler Code can be configured. (Refer to 26
Voice Scrambler on page 124.)
Scrambler Code can be configured by using KPG-101D.
Two types of scrambler are available. The transceiver
can be configured to use a built-in scrambler or an
optional scrambler to be installed in the transceiver. As
for the Scrambler Code configuration, a user can
configure the Scrambler Code that may be required for
the optional scrambler board.
„ Configuration using KPG-101D
• Configuring the Scrambler Code (Refer to FPRG
6.6.16 Scrambler Code.)
15.3 Repeater Information
The following functions relevant to repeaters in LTR
Trunked Radio System can be configured by using KPG-
101D:
• Area Code
• Home Repeater
• Repeater Information Table
15.3.1 Area Code
This function can be used to prevent interference from
adjacent systems. Area Code is normally configured for a
value of 0. When the transceiver suffers from
interference, configure the Area Code of one system for a
value of 0 and the code for the other system for a value of
1.
Area Code can be configured by using KPG-101D.
„ Configuration using KPG-101D
• Configuring the Area Code (Refer to FPRG 6.5.1
Area Code.)
15.3.2 Home Repeater
Home Repeater can be used to receive various
information from the LTR Trunked Radio System. The
transceiver always transmits, receives and executes
Trunkout via the Home Repeater.
A user can transmit or receive using a repeater if the
repeater is available.
The Home Repeater provides the repeater number to the
user if the repeater is shared with other parties. The
transceiver at the receiving party receives the repeater
number and jumps to the Trunkout Repeater to receive a
call.
Home Repeater can be configured by using KPG-101D.
„ Configuration using KPG-101D
• Configuring the Home Repeater (Refer to FPRG
6.5.2 Home Repeater.)