18 DTMF
70
Confidential
FUNC (K)/Ver. 1.01
18.3 Decode
The following functions relevant to DTMF Decode can be
configured by using KPG-101D:
•
DTMF Signaling
•
Intermediate Code
•
Group Code
•
Alert Tone (Individual Call)
•
Alert Tone (Group Call)
•
Transpond
•
Code
•
Transpond/ Alert Tone
•
Stun
•
Auto Reset Timer
•
Clear to Transpond
•
Selective Call Alert LED
•
DTMF Number Display
18.3.1 DTMF Signaling (Conventional)
Configure the DTMF signaling type.
DTMF Signaling can be configured by using
KPG-101D. (Refer to FPRG 6.10.2 Decode Tab - DTMF
Signaling (Conventional).)
Note:
DTMF signaling is available in Conventional Group.
18.3.2 Intermediate Code
(Conventional)
Intermediate Code is used for receiving a call if Selective
Call is configured for DTMF signaling.
Intermediate Code can be configured by using
KPG-101D. (Refer to FPRG 6.10.2 Decode Tab -
Intermediate Code (Conventional).)
Note:
Intermediate Code is available in Conventional Group.
18.3.3 Group Code (Conventional)
Group Code is used as a wild card to receive a call with
DTMF signaling (Code Squelch/ Selective Call). The
Group Code is treated as a wild card in standby ID code.
So, the rest of received code digits match the standby ID
code, it is treated as a Group Call.
Group Code can be configured by using KPG-101D.
(Refer to FPRG 6.10.2 Decode Tab - Group Code
(Conventional).)
Note:
Group Code is available in Conventional Group.
18.3.4 Alert Tone (Individual Call)
(Conventional)
The type of alert tone emitted from the transceiver when
the Individual Call ID matches while Code Squelch is
enabled, or when the Individual Call ID and Intermediate
Code match after the transceiver receives a Selective
Call, can be configured.
Alert Tone (Individual Call) can be configured by using
KPG-101D. (Refer to FPRG 6.10.2 Decode Tab - Alert
Tone (Individual Call) (Conventional).)
Note:
Alert Tone (Individual Call) is available in Conventional
Group.
18.3.5 Alert Tone (Group Call)
(Conventional)
The type of alert tone emitted from the transceiver when
the Individual Call ID matches while Code Squelch is
enabled, or when the Individual Call ID and Intermediate
Code match after the transceiver receives a Selective
Call using a call with a Group Code, can be configured.
Alert Tone (Group Call) can be configured by using KPG-
101D. (Refer to FPRG 6.10.2 Decode Tab - Alert Tone
(Group Call) (Conventional).)
Note:
Alert Tone (Group Call) is available in Conventional Group.
Configuration
Operation
Off
Disables DTMF Signaling.
Code Squelch
The transceiver waits for a call with the ID
configured in the
Channel Edit
window >
ID
edit box. 3 to 10 numeric digits can be
configured for the ID.
The transceiver executes the operation
selected for Alert Tone (Individual Call) and
Transpond when the ID matches. The
transceiver can communicate only with QT/
DQT.
Selective Call
The transceiver waits for a call with the ID
configured in the
Channel Edit
window >
ID
edit box and Intermediate Code + Status
Code. 3 to 4 numeric digits can be
configured for the ID.
The transceiver executes the operation
selected for Alert Tone (Individual Call) and
Transpond when the ID and Intermediate
Code match and the transceiver receives
the Status Code. The transceiver can
communicate only with QT/DQT.
