![background image](http://html2.mh-extra.com/html/keithley/6517b/6517b_reference-manual_4068717283.webp)
Section 14: SCPI command reference
Model 6517B Electrometer Reference Manual
14-32
6517B-901-01 Rev. C / August 2015
Command Description
Default
parameter
SCPI
:STOP?
Query stop voltage
:STEP <NRf>
Specify step voltage; -1000 to 1000
+1 V
:STEP?
Query step voltage
:STIME <NRf>
Specify step time; 0 to 9999.9 (sec)
1 sec
:STIME?
Query step time
:UNIT command summary
Command Description
Power-up
defaults
:UNIT
:TEMPerature <name>
:TEMPerature?
Select temperature units (
C, CEL, F,
FAR, K
)
Query temperature units
C
SCPI command subsystems
CALCulate subsystem
The commands in this subsystem are used to configure and control the three Calculate subsystems and are
summarized in the
CALCulate command summary
(on page 14-7).
CALCulate[1]
This subsystem is used to configure and control the polynomial and percent math calculations.