Model 6517B Electrometer Reference Manual
Section 14: SCPI command reference
6517B-901-01 Rev. C / August 2015
14-27
Command Description
Default
parameter
SCPI
:DELay <n>
Program delay (0 to 999999.999 sec) 0
:DELay?
Query delay
:SOURce <name>
Select control source (
HOLD
,
IMMediate
,
TIMer
,
MANual
,
BUS
,
TLINk
, or
EXTernal
)
IMMediate
(Note 2)
:SOURce?
Query control source
:TIMer <n>
Set timer interval (0 to 999999.999
sec)
0.1
:TIMer?
Query timer
:SIGNal
Loop around control source
:TCONfigure
Path to configure triggers:
:DIRection
<name>
Enable (
SOURce
) or disable
(
ACCeptor
) Bypass
ACCeptor
:DIRection?
Query direction
:ASYNchronous
Path to configure asynchronous
trigger link:
:ILINe
<NRf>
Select input line (1 to 6)
2
:ILINe?
Query input line
:OLINe
<NRf>
Select output line (1 to 6)
1
:OLINe?
Query output line
:TRIGger[:SEQuence[1
]]
Path to program trigger layer:
:IMMediate
Loop around control source
:COUNt <n>
Set measure count (1 to 99999, or INF) (Note 3)
:COUNt?
Query measure count
:DELay <n>
Set delay (0 to 999999.999 sec)
0
:DELay?
Query delay
:SOURce <name>
Select control source (
HOLD,
IMMediate, TIMer, MANual, BUS,
TLINk,
or
EXTernal
)
IMMediate
(Note 2)
:SOURce?
Query control source
:TIMer <n>
Set timer interval (0 to 999999.999 sec) 0.1
:TIMer?
Request the programmed timer interval
:SIGNal
Loop around control source
:TCONfigure
Path to configure triggers:
:PROTocol
<name>
Select protocol (
ASYNchronous
or
SSYNchronous
)
ASYN
:PROTocol?
Query protocol
:DIRection
<name>
Enable (
SOURce
) or disable
(
ACCeptor
) Bypass
ACCeptor
:DIRection?
Query direction
:ASYNchronous
Path to configure asynchronous
trigger link:
