Section 11: Remote operations
Model 6517B Electrometer Reference Manual
11-16
6517B-901-01 Rev. C / August 2015
IEEE-488 trigger model
The following information describes the operation process of the Model 6517B over the IEEE-488
bus. The flowchart below, which summarizes operation over the bus, is called the Trigger model. It is
called the trigger model because operation is controlled by SCPI commands from the Trigger
subsystem (see
SCPI command reference
(on page 14-1)). Notice that key SCPI commands are
included in the trigger model.
See
Triggering
(on page 7-1) for additional trigger information.
Figure 102: IEEE-488 trigger model
