Keithley 2790, Reference Manual

Page: 378 / 568

Model 2790 SourceMeter® Switch System Reference Manual 15-23
SYSTem
:TIME <hr, min,
sec>
Set system time using 24-hour format. Sec 6
:TIME? Query system time.
:DATE <yr, mo,
day>
Set system date (yr = 2002 to 2101). Sec 6
:DATE? Query system date.
:TSTamp Path to set timestamp: Sec 6
:TYPE <name> Select timestamp type (RELative or RTCLock). REL
:TYPE? Query timestamp type that will be used for the
next buffer storage.
:RELative Path to reset relative timestamp:
:RESet Reset relative timestamp to 0.
:RNUMber Path to reset reading number: Sec 14
:RESet Reset reading number. Next reading will be #1.
:ERRor? Query (read) Error Queue. (Note 4) Sec 11
✓
:CLEar Clears messages from the Error Queue. Sec 11
:VERSion? Query rev level of SCPI standard. Sec 14
✓
:LOCal Take Model 2790 out of remote and restore opera-
tion of front panel controls (RS-232 only).
Sec 10
:REMote Place Model 2790 in remote (RS-232 only). Sec 10
:RWLock Lockout front panel controls (RS-232 only). Sec 10
Note:
1. If there is no card in the specified slot, error -241 Hardware Missing will occur.
2. If a pseudocard is installed in the slot, the message "????????" will be returned when querying the serial number or firmware
revision.
3. These commands are not useful to Model 2790 users since none of the relevant modules are supported by the Model 2790 main-
frame. They are included to provide compatibility with the software that also supports the 2700/2750. Future modules for the
Model 2790 may use these commands.
4. Power-up and *CLS clears the error queue.*RST, SYSTem:PRESet, and STATus:PRESet have no effect on the error queue.
Table 15-8 (cont.)
SYSTem command summary
Command Description
Default
parameter Ref SCPI