Keithley 2790, Reference Manual

Page: 360 / 568

Model 2790 SourceMeter® Switch System Reference Manual 15-5
CALCulate3
:LIMit1
:CLEAR Path to clear events:
✓
[:IMMediate] Clear high and low events.
✓
:AUTO <b> Enable or disable auto-clear. ON
✓
:AUTO? Query auto-clear.
✓
:LIMit2 Path to control LIMIT 2 test:
✓
:UPPer Path to configure upper limit:
✓
[:DATA] <n>
[, <clist>]
Set upper limit (-4294967295 to
+4294967295).
2
✓
[:DATA]? [<clist>] Query upper limit.
✓
:LOWer Path to configure lower limit:
✓
[:DATA] <n>
[, <clist>]
Set lower limit (-4294967295 to
+4294967295).
-2
✓
[:DATA]? [<clist>] Query lower limit.
✓
:STATe <b>
[, <clist>]
Enable or disable limit test. OFF
✓
:STATe? [<clist>] Query state of limit test.
✓
:FAIL? Query test result (1 = failing).
✓
:CLEAR Path to clear events:
✓
[:IMMediate] Clear high and low events.
✓
:AUTO <b> Enable or disable auto-clear. ON
✓
:AUTO? Query auto-clear.
✓
Notes:
1. The :MMFactor and :MA1Factor commands perform the same operations.
2. The :MBFactor and :MA0Factor commands perform the same operations.
3. For mX+b and m/X+b units, <char> = one character; ‘A’ through ‘Z’, degrees symbol (‘°’), or ohms symbol (‘
Ω
’).
4. ON is the *RST default parameter and OFF is the SYSTem:PRESet default.
Table 15-1 (cont.)
CALCulate command summary
Command Description
Default
parameter Ref SCPI