Keithley 2790, Reference Manual

Page: 369 / 568

15-14 Model 2790 SourceMeter
®
Switch System Reference Manual
[SENSe[1]]
:RESistance Path to configure resistance. Sec 3
✓
:APERture <NRf>
[, <clist>]
Set integration rate in seconds (60Hz;
1.67e-4 to 1, 50Hz; 2e-4 to 1).
(Note 2) Sec 4
:APERture? [<clist>] Query aperture integration rate.
:NPLCycles <n>[, <clist>] Set integration rate in line cycles (60Hz;
0.01 to 60, 50Hz; 0.01 to 50).
5.0 Sec 4
✓
:NPLCycles? [<clist>] Query line cycle integration rate.
✓
:RANGe Path to set measurement range: Sec 4
✓
[:UPPer] <n> [, <clist>] Select range (0 to 120e6). 120e6
✓
[:UPPer]? [<clist>] Query range.
✓
:AUTO <b> [, <clist>] Enable or disable auto range. ON
✓
:AUTO? [<clist>] Query state of auto range.
✓
:DIGits <n> [, <clist>] Specify measurement resolution (4 to 7). 7 Sec 4
:DIGits? [<clist>] Query resolution.
:REFerence <n> [, <clist>] Specify reference (0 to 120e6). 0 Sec 5
✓
:STATe <b> [, <clist>] Enable or disable reference. OFF
✓
:STATe? [<clist>] Query state of reference.
✓
:ACQuire [, <clist>] Use input signal as reference.
:REFerence? [<clist>] Query reference value.
✓
:AVERage Path to configure and control filter: Sec 4
:TCONtrol <name> Select filter type (MOVing or REPeat). (Note 3)
:TCONtrol? Query filter type.
:WINDow <NRf> Set filter window in % of range
(0 to 10).
0.1
:WINDow? Query filter window.
:COUNt <n> [, <clist>] Specify filter count (1 to 100). 10
:COUNt? [<clist>] Query filter count.
[:STATe] <b> [, <clist>] Enable or disable filter. (Note 4)
[:STATe]? [<clist>] Query state of digital filter.
7702 <clist> = (@SCH), where: S = Mainframe slot number (1 or 2) and CH = Switching module channel number.
7751/7752/7753 <clist> (DCV,
Ω
2,
Ω
4) = (@Mn) (see “Memory patterns,” page 2-36 ).
Table 15-5 (cont.)
SENSe command summary
Command Description
Default
parameter Ref SCPI