Keithley 2790, Reference Manual, Page: 139 / 568

3-34 Model 2790 SourceMeter
®
Swich System Reference Manual
Commands
1
Description Default Ref
CONT function
[SENSe[1]] Optional root command.
:CONTinuity:THReshold <NRf> Set continuity threshold in ohms;
<NRf> = 1 to 1000.
10
SYSTem:BEEPer <b> Enable/disable beeper; <b> = ON or OFF. ON
Set temperature measurement units
UNIT:TEMPerature <name> Set temperature units; <name> = C, CEL,
F, FAR, or K.
f*
Trigger and retrieve readings g*
INITiate:CONTinuous <b> Enable/disable continuous initiation;
<b> = ON or OFF.
INITiate[:IMMediate] Trigger one or more measurements. g*
[SENSe[1]] Optional root command.
:DATA[:LATest]? Returns the last reading string. g*
:DATA:FRESh? Returns the last “fresh” reading string. g*
FETCh? Return reading(s). g*
READ? Trigger and return reading(s). g*
Channel list parameter (7702):
<clist> = (@SCH)
where: S = Mainframe slot number (1 or 2)
CH = Switching module channel number (must be 2 digits)
Examples: (@101) = Slot 1, Channel 1
(@101, 203) = Slot 1, Channel 1 and Slot 2, Channel 3
(@101:110) = Slot 1, Channels 1 through 10
Channel list parameter (7751/7752/7753, DCV,
Ω
2,
Ω
4 only):
<clist> = (@Mn)
where: M = Memory pattern command
n = Location number (1 to 40)
*Refer to the paragraphs following this table for more information.
1
The <clist> parameter is used for the module to configure one or more channels for a scan.
Table 3-5 (cont.)
Basic measurement commands