Keba KeContact Series, System Manual

Page: 61 / 156

Load management program
61 / 156
Sessions table
Session ID: Unique identifier of the Charging Session.
Wallbox: Socket number of the Wallbox.
Start:
Point in time when the charging transaction has started.
End: Point in time when the charging transaction has ended.
Signalling: Shows whether the Charging Session was a
“Low-level (PWM)” charging
session or a
“High-level (ISO 15118)” charging session.
Termination: Code indicating the reason for the termination of a transaction.
Display values:

Vehicle unplugged:
The EV has initiated the termination by unplugging.

ISO 15118 command:
The EV has initiated the termination by unplugging.
High-level: The EV has initiated the termination by sending a com-
mand via high-level communication.

Socket failure:
The charging transaction has been terminated by the Charge Point
because of a socket failure (for example overheating).

Power control:
The charging transaction has been terminated because the EV has
drawn more than the assigned power.

Authorization failure:
Authorization has been denied for the charging session.

Housekeeping.
The EV has unplugged during a power cut, socket unavailability or
down-time of the KeContact M10.
Energy consumed [kWh]: Energy consumed during the Charging Session.
Current [A]: Current according to the last measurement at the Wallbox.
Buttons
Got to Wallbox: Press the [Go to Wallbox] button to go to the Monitoring menu of the se-
lected Wallbox.
Session history: Press the [Session history] button to go to the Session History screen.