Load management program
32 / 156
6.2 Accessing the Load management program
►
You can easily access the Load management program using a conventional web browser (e.g.
Internet Explorer).
Please ask your network administrator for the detailed integration of the KeContact M10 in your
corporate network. This is not part of this manual.
Connection via port ETH0 (for Installation):
Type in the IP address
http://192.168.25.1:9091/admin
of the KeContact M10 in the ad-
dress bar of your web browser (an open port “9091” is required to get access to the application).
Secured connection via port ETH1:
Type in the IP address
https://xxx.xxx.xxx.xxx:8443/admin
of the KeContact M10 in the
address bar of your web browser (an open port “8443” is required to get access to the applica-
tion). After a restart of the KeContact M10, the IP address is shown in the MMI display.
Please note that higher versions of the Internet Explorer 9 do not accept certificates which are
unsafe (like the KEBA standard certificate).
Certificates:
To guarantee a safe connection via HTTPS, the KeContact M10 is delivered with a digital KEBA
standard certificate. The standard certificate is valid for at least 2 years.
KEBA standard certificates are non registered and unsafe certificates. This is the reason
why web browsers may show a warning note when the M10 User Interface is loaded.
It is strongly recommended to replace the pre-installed, unsafe KEBA standard certificate with a
trusted certificate of your choice. The certificates can be replaced via the M10 User Interface.
►
The HOME screen of the Load management program appears.
Without Login you have access to the HOME screen and the Monitoring screens. If you want to change con-
figuration values, a Login with Username and Password is required.
Accounts and their access rights and passwords can be maintained at the account management screens of
the KeContact M10. Access rights refer to the groups of screens such as installation, configuration or man-
agement accessible from the toolbar at the bottom of a KeContact M10 screen. In addition, there is a special
access right for the account management screen belonging to the management group. The user can change
its password from the password entry screen.
The KeContact M10 ships with predefined accounts supporting typical user roles such as an installer. It is
strongly recommended to change the passwords of those accounts during the initial configuration of the Ke-
Contact M10.
Summary of Contents for KeContact Series
Page 1: ...KeContact Load Management System manual...
Page 151: ...Appendix 151 156 7 3 Data sheet power supply TDK Lambda DPP50 Dimensions...
Page 152: ...Appendix 152 156...
Page 156: ......