KEB COMBIVERT F5, Reference Manual, Page: 8 / 349

8
General
with the following to display the execution time of the timer interrupts that
are used to execute the software’s primary functions. This group is only vis-
ible with Combivis. These parameters are (1) DB00 Lift Time, (2) DB01 DIN/
Switch/ServSLV Time, and (3) DB02 Lift Com Time.
Section 8.1: Added max value 2147483647 and min value is -2147483648
For LE37 - Added a minimum value of 0 and max value of 13, and added a
default level of “2”. The default value for LE38 and LE39 is now “1.”
Section 8.1: The upper limit of US06 Contract Speed has been increased
from 1600FPM to 2000FPM
Section 8.1: The max value of LS00 was corrected from 0.478m/s to the
correct max value in m/s mode of 0.010m/s.
Section 8.1: The max value of LS01 is 59fpm when LX50 Unlock LS01 is
activated.
Section 8.1: Added password level of “Adjuster” to LE37, LE38, and LE39
Section 10.1: Updated to show that Combivis 6 software version 6.7 and
greater is not compatible with Windows 7 (32 and 64 bit) and not recom-
mended for use with Windows 8.8
Section 12.1: Changed the diagram of a VFD input and output circuits to
have the GTR7 under the resistor instead of above.