KaVo ORTHOPANTOMOGRAPH OP 3D Pro, Installation Manual

Page: 94 / 168

6 Panoramic and 3D calibrations and adjustments
86
The results of the periodical checks below should be
recorded and the check images filed. To do this, it is
recommended that a “Constancy Test” “Patient” record is
created under which the test images can be recorded.
Please note that the reference levels may change with x-
ray unit firmware / driver updates. Upon such updates, new
reference levels for measured values for the unit should be
established. Always refer to the limiting values that are
specified with current 3D QC test.
3D Quality Check program execution
1. Attach the QC phantom to the unit.
2. Select the 3D QC program.
3. Press Patient Positioning .
4. Take an exposure.
NOTICE! Reference your 3D imaging program manual
for instructions on viewing the 3D volume.
3D QC program result evaluation
NOTICE! Reference your 3D imaging program manual for
instructions on viewing the 3D volume.