KaVo ORTHOPANTOMOGRAPH OP 3D Pro, Installation Manual

Page: 12 / 168

1 Introduction
4
1.6 Warnings and precautions
1.6.1 Warnings for cross infection
1.6.2 Warnings to be observed during
installation and service
Always use available disposable protective covers with the
patient positioning accessories:
• Bite fork cover
• Chin support cover
• Head support cover
• Nose support cover
• Ear holder cover
In case the transportation package has been damaged,
make sure the actual product is fully intact.
Before attempting to service the device make sure that you
know how to operate it. Read the user’s manual.
Read and familiarize yourself with the warnings and precau-
tions listed in the user’s manual.
Only use original spare parts from the manufacturer when
repairing the device or replacing parts.
Warning - Radiation Safety
Before servicing the unit familiarize yourself with local and
national radiation safety standards and requirements relat-
ing to dental x-ray equipment.
Warning - Electrical Safety
Disconnect the unit from the main power supply before re-
moving any covers.
Disconnect the unit from the main power supply before re-
pairing or replacing mechanical parts or installing accesso-
ries.
Be careful when operating the unit not to get body parts or
clothing trapped between moving parts.
Disconnect the unit from the mains power connection be-
fore servicing the unit, e.g. replacing circuit boards or other
electrical components.
If there are capacitors on a circuit board or electrical device
wait ten (10) minutes, after disconnecting the unit from the
power supply, before handling the board or device.