KaVo ORTHOPANTOMOGRAPH OP 3D Pro, Installation Manual

Page: 157 / 168

8 Special procedures
149
1. Wrong command syntax or binary file name typed in.
Check the syntax and filename.
2. The files are not found in the assumed location. Run the
s2terminal using the openS2.bat file found in the soft-
ware release package's root folder. Check that the file
mentioned in the error message is really present. If not,
unzip a new copy of the release package.
The unit type of the Main CPU board is incorrectly set. The
unit type for which the s2terminal is trying to find binary
files is indicated in the error message. See chapter Special
cases / Programming a R3220 Main CPU board having
wrong unit type configured for instructions on how to solve
this issue.
8.11 Configurable panoramic mAs limit
A mAs (milliampere-seconds) limit of 250 mAs may be set
for panoramic programs, if required by local regulations.
When mAs limiting is enabled, the largest mA setting is
removed for the imaging programs Standard panoramic,
OrthoZone and Wide arch panoramic.
The mAs limiting feature is controlled by the s2terminal
service program
limitmas :
limitmas
prints current setting
limitmas on
enables limiting
limitmas off
disables limiting