K&R GT600-4T132G, User Manual

Page: 82 / 362

4. Operating Panel (Keypad & Display)
- 80 -
QUICK
Default screen
Base mode
(all function parameters)
QUICK
User-defined mode
(restricted in group FE)
QUICK
User-modified mode
(Modified parameters)
QUICK QUICK
No key operation
within 2s
When
FP-03 = x1
When
FP-03 = 1x
Enter
Enter Enter
...
...
...
... ... ...
4.2.3 Function Parameter Operations
■
Viewing Function Parameters
The drive provides three display modes for viewing parameters, described in Table 4-1.
Table 4-1 Function parameter display modes
Function Code Display Mode Parameter Name Setting Range
Base mode Show all function parameters in
sequence
User-defined quick-view
mode
The user can define up to 30 function
parameters to include into function
group FE.
User-modified quick-view
mode
The function parameters that have
been modified by a user are shown
here.
Press to cycle through three function parameter display modes. In each mode, the
method you use to view and modify parameter value is the same as shown in .
Figure 4-5 Switching between three function parameter display modes
The value you set for function parameter FP-03 determines whether the operating panel
displays quick-view user-defined and quick-view user-modified function groups. The base
mode is always displayed.
Table 4-2 Setting FP-03 to select quick-view display modes
Value of FP-03 User-modified Group User-defined Group
00 Not displayed Not displayed
01 Not displayed Displayed
10 Displayed Not displayed
11 (default) Displayed Displayed
4