K&R GT600-4T132G, User Manual

Page: 188 / 362

6. Description of Parameters
- 186 -
●
Flexible connection
For the master in speed control, perform the following settings. Note that only the
setting of F8-15 can be modified.
Function Code Parameter Name Setting Range Setting
Fd-00 Baud rate 0000 to 6039 Keep thousands position of
this parameter to the same
value for the master and
slave.
A8-00 Selection of
point-point
communication 0: Disabled
1: Enabled
1
A8-01 Master and slave
selection 0: Master
1: Slave
0
F0-10 Max. frequency 5.00 to 500.00 Hz 50.00 Hz
Keep the same setting of
this parameter for the master
and slave.
F8-15 Droop rate 0.00 to 10.00 Hz 1.00 Hz
F0-17 Acceleration time 1 0.0 to 6500.0s Keep the same setting of
this parameter for the master
and slave.
F0-18 Deceleration time 1 0.0 to 6500.0s Keep the same setting of
this parameter for the master
and slave.
For slave in speed control, perform the following settings. Note that only setting of F8-
15 can be modified.
Function Code Parameter Name Setting Range Setting
Fd-00 Baud rate 0000 to 6039 Keep thousands
position of this
parameter to the
same value for the
master and slave.
A8-00 Selection of
point-point
communication 0: Disabled
1: Enabled
1
A8-01 Master and slave
selection 0: Master
1: Slave
1
6