K&R GT600-4T132G, User Manual

Page: 322 / 362

Appendix A Standards Compliance
12
- 319 -
■
AC Output Reactor Installation
Whether to install an AC output reactor on power output side is dependent on actual
situation. Cable connecting AC drive and motor should not be too long; capacitance
enlarges when an over-long cable is used and thus high-harmonics current may be easily
generated.
When an output reactor used, cable length can be increased to the value in below table.
AC Drive Power (kW) Rated Voltage (V) Cable Length Limit (m)
4 200 to 500 50
5.5 200 to 500 70
7.5 200 to 500 100
11 200 to 500 110
15 200 to 500 125
18.5 200 to 500 135
22 200 to 500 150
≥ 30
280 to 690 150
●
AC Output Reactor Model
Recommended AC output reactor manufacturer and models are listed in the following
table.
AC Drive Model AC Output Reactor Model (K&R)
GT600-4T18.5GB MD-OCL-50-0.14-4T-1%
GT600-4T22GB MD-OCL-60-0.12-4T-1%
GT600-4T30GB MD-OCL-80-0.087-4T-1%
GT600-4T37GB MD-OCL-90-0.078-4T-1%
GT600-4T45GB MD-OCL-120-0.058-4T-1%
GT600-4T55GB MD-OCL-150-0.047-4T-1%
GT600-4T75GB MD-OCL-200-0.035-4T-1%
GT600-4T90G MD-OCL-250-0.028-4T-1%
GT600-4T110G MD-OCL-250-0.028-4T-1%
GT600-4T132G MD-OCL-330-0.021-4T-1%
GT600-4T160G MD-OCL-330-0.021-4T-1%
●
Designation rules
MD-OCL 50 0.14 4T 1%
Mark 0.14
Inductance 0.14 mH
50 A 50
Rated Current Mark
Inovance AC Output
Reactor
1% 1%
Voltage Drop Percentage Mark
380 V 4T
Rated Voltage Mark