K&R GT600-4T132G, User Manual

Page: 39 / 362

2. Mechanical Installation
- 37 -
Because the center of gravity of the
drive is too high, please use soft strap
(with hook at both ends) in the process
of push-in to prevent turnover.
Step 3: Install the AC drive in the cabinet.
●
Remove the front cover from the drive (refer to
the handle is exposed.
●
Arrange two persons to align castors of the drive to the guide rail.
Figure 2-20 Align castors of the drive to the guide rail
). Then
●
Push the drive into the cabinet slowly. Please use auxiliary strap in the process of push-in to
prevent turnover, as shown in the following figure.
Figure 2-21 Push the drive into the cabinet
2
Guide rail (optional)