K&R GT600-4T132G, User Manual

Page: 339 / 362

Appendix B Parameter Table
12
- 337 -
Para. No. Para. Name Setting Range Default Property Page
F5-21 DO2 output delay 0.0s to 3600.0s 0.0s
☆
F5-22 DI active mode selection 1 00000 to 11111 00000
☆
Para. No. Para. Name Setting Range Default Property Page
Group F6: Start/Stop Control
F6-00 Start mode 0: Direct start
1: Catching a spinning motor
2: Pre-excited start
3: SVC quick start
0
☆
F6-01 Mode of catching a spinning motor 0: From stop frequency
1: From 50 Hz
2: From max. frequency
0
★
F6-02 Speed of catching a spinning
motor 1 to 100 20
☆
F6-03 Start frequency 0.00 to 10.00 Hz 0.00 Hz
☆
F6-04 Start frequency holding time 0.0s to 100.0s 0.0s
★
F6-05 DC injection braking 1 level/Pre-
excitation level 0% to 100% 50%
★
F6-06 DC injection braking 1 active time
/Pre-excitation active time
0.0s to 100.0s 0.0s
★
F6-07 Acceleration/Deceleration mode 0 to 2 0
★
F6-08 Time proportion of S-curve start
segment 0.0% to (100.0%
– F6-09)
30.0%
★
F6-09 Time proportion of S-curve end
segment 0.0% to (100.0%
– F6-08)
30.0%
★
F6-10 Stop mode 0: Decelerate to stop
1: Coast to stop
0
☆
F6-11 DC injection braking 2 start
frequency 0.00 Hz to maximum
frequency 0.00 Hz
☆
F6-12 DC injection braking 2 delay time 0.0 to 100.0s 0.0s
☆
F6-13 DC injection braking 2 level 0% to 100% 50%
☆
F6-14 DC injection braking 2 active time 0.0s to 100.0s 0.0s
☆
F6-15 Braking use ratio 0% to 100% 100%
☆
-
F6-18 Catching a spinning motor current
limit 30% to 200% Model
dependent
★
-
F6-21 Demagnetization time (effective
for SVC)
0.00s to 5.00s Model
dependent
☆
-