K&R GT600-4T132G, User Manual

Page: 98 / 362

5. Quick Setup
- 96 -
CONTINUE Para. Parameter name Default Commission
if it is VF control
Set VF parameters F3-00 V/F curve selection 0
0: Linear V/F
1: Multi-point V/F
2: Square V/F
3: 1.2-power V/F
4: 1.4-power V/F
6: 1.6-power V/F
8: 1.8-power V/F
9: Reserved
10: V/F complete separation
11: V/F half separation
SETTING RANGE: 0 to 11;
F3-01 Torque boost 0.0
0.0 to 30.0 %;
NOTE: if it is 0, then auto torque boost is activated, and it
is recommended to use auto torque boost.
F3-02 Frequency limit of torque boost 50.00
0.00 Hz to maximum output frequency
F3-03 Multi-point V/F frequency 1 0.00
0.00 Hz to F3-05
F3-04 Multi-point V/F voltage 1 0.0
0.0 to 100.0 V
F3-05 Multi-point V/F frequency 2 0.00
F3-03 to F3-07, Hz
F3-06 Multi-point V/F voltage 2 0.0
0.0 to 100.0 V
F3-07 Multi-point V/F frequency 3 0.00
F3-05 to rated motor frequency F1-04, Hz
F3-08 Multi-point V/F voltage 3 0.0
0.0 to 100.0 V
Trial RUN Use operating panel, or digital input terminal, or serial
communication control, to start AC Drive, check if the
running performance satisfies your application. If yes, then
go forward to next step, if NO, then go back to check.
CONTINUE Para. Parameter name Default Commission
5