Juniper OCX1100, Hardware Manual

Page: 32 / 204

Field-Replaceable Units in OCX1100 Switches
Field-replaceable units (FRUs) are components that you can replace at your site. The
FRUs in OCX1100 switches are hot-removable and hot-insertable: You can remove and
replace them without powering off the switch. The FRUs in OCX1100 switches are:
•
Power supplies
• Fan modules
• Transceivers
NOTE: Transceivers are not part of the shipping configuration. If you want
to purchase transceivers, additional power supplies, or fan modules for your
switch, you must order them separately.
NOTE: If you have a Juniper J-Care service contract, register any addition,
change, or upgrade of hardware components at
https://www.juniper.net/customers/support/tools/updateinstallbase/
. Failure
to do so can result in significant delays if you need replacement parts. This
note does not apply if you replace existing components with the same type
of component.
Related
Documentation
Installing and Removing OCX1100 Switch Hardware Components on page 74
•
Chassis Status LEDs on OCX1100 Switches
An OCX1100 switch has four chassis status LEDs (labeled
LOCATOR
,
STAT
,
PWR
, and
FAN ) on the left of the chassis, next to the RESET button (see Figure 5 on page 12 ).
Figure 5: Chassis Status LEDs in an OCX1100-48SX Switch
3— 1— PWR STAT
4— 2— FAN LOCATOR
Copyright © 2017, Juniper Networks, Inc. 12
OCX1100 Switch Hardware Guide