Juniper OCX1100 Hardware Manual Download Page 104

Page: 104 / 204

Insert the power cord plug into a DC power source outlet.

If the DC power source outlet has a power switch, set it to the on (

) position.

Verify that the LEDs on each power supply are lit green.

If the LED is lit amber, remove power from the power supply, and replace the power
supply (see

“Removing a DC Power Supply from an OCX1100 Switch” on page 114

Do not remove the power supply until you have a replacement power supply ready:
the power supplies or a cover panel must be installed in the switch to ensure proper
airflow.

CAUTION:

We recommend that you install either a replacement power

supply or a cover panel in an empty power supply slot to prevent chassis
overheating and dust accumulation.

Documentation

•

DC Power Supply in OCX1100 Switches on page 25

•

Power Supply LEDs in OCX1100 Switches on page 27

OCX1100 Switch Hardware Guide

Summary of Contents for OCX1100






















































































































































































Search results

Summary of Contents for OCX1100

Reviews:

Related manuals for OCX1100

Brands by name

Popular brands

Juniper OCX1100, Hardware Manual

Search results

Summary of Contents for OCX1100

Reviews:

Related manuals for OCX1100

Brands by name

Popular brands