Juniper OCX1100 Hardware Manual Download Page 58

Page: 58 / 204

•

For the cooling system to function properly, the airflow around the chassis must be
unrestricted. See

Figure 17 on page 38

and

Figure 18 on page 38

for reference.

Figure 17: Front-to-Back Airflow Through OCX1100-48SX Switch Chassis

Figure 18: Back-to-Front Airflow Through the OCX1100-48SX Switch
Chassis

•

If you are mounting the switch on a rack or cabinet along with other equipment, ensure
that the exhaust from other equipment does not blow into the intake vents of the
chassis.

•

Leave at least 6 in. (15.2 cm) clearance in front of and behind the chassis for airflow.

•

Leave at least 24 in. (60.9 cm) clearance in front of and behind the switch for service
personnel to remove and install hardware components. See

Figure 19 on page 39

OCX1100 Switch Hardware Guide

Summary of Contents for OCX1100






















































































































































































Search results

Summary of Contents for OCX1100

Reviews:

Related manuals for OCX1100

Brands by name

Popular brands

Juniper OCX1100, Hardware Manual

Search results

Summary of Contents for OCX1100

Reviews:

Related manuals for OCX1100

Brands by name

Popular brands