Juniper OCX1100, Hardware Manual

Page: 76 / 204

Table 33: Console Port Connector Pinout Information (continued)
Description Signal Pin
Data carrier detect CD Input 7
Clear to send CTS Input 8
Related
Documentation
Connecting a Device to a Management Console by Using an RJ-45 Connector on page 86
•
•
Configuring the Console Port Type (CLI Procedure)
Mini-USB Port Pinout Specifications
If your management host (laptop or PC) does not have a DB-9 male connector pin or an
RJ-45 connector pin but has a USB port, you can connect your management host to the
Mini-USB Type-B console port by using a cable that has a standard Type-A USB connector
on one end and a Mini-USB Type-B (5-pin) connector on the other end.
The Mini-USB Type-B console port uses a Mini-USB Type-B connector to connect to a
console management device. The default baud rate for the console port is 9600 baud.
Table 34 on page 56 provides the pinout information of the Mini-USB Type-B console
port.
Table 34: Mini-USB Type-B Console Port Pinout Information
Description Signal Pin
+5 VDC VCC 1
Data - D- 2
Data + D+ 3
Could be not connected (N/C), connected to ground (GND), or used as an attached device
presence indicator N/C X
Ground GND 4
Related
Documentation
Management Cable Specifications on page 53
•
RJ-45 Management Port Connector Pinout Information
Table 35 on page 57 provides the pinout information for the RJ-45 connector for the
management port on Juniper Networks devices.
Copyright © 2017, Juniper Networks, Inc. 56
OCX1100 Switch Hardware Guide