Juniper OCX1100 Hardware Manual Download Page 94 | Manualshive

Page: 94 / 204

background image

Figure 23: Sliding the Switch into Rack-Mounting Slider Brackets and
Mounting the Switch to the Front Posts of the Rack

g000667

8.

Ensure that the switch chassis is level by verifying that all the screws on the front of
the rack are aligned with the screws at the back of the rack.

NOTE:

We recommend that you install cover panels in unused fan modules

and power supply slots.

Related

Documentation

Connecting AC Power to an OCX1100 Switch on page 80

•

•

Connecting DC Power to an OCX1100 Switch on page 82

•

Connecting and Configuring an OCX1100 Switch (CLI Procedure) on page 100

•

Rack-Mounting and Cabinet-Mounting Warnings on page 148

Installing and Removing OCX1100 Switch Hardware Components

The OCX1100 switch chassis is a rigid sheet-metal structure that houses the hardware
components. The field-replaceable units (FRUs) in OCX1100 switches are:

•

Power supplies

•

Fan modules

•

Transceivers

The power supplies (AC or DC), fan modules, and transceivers are hot-removable and
hot-insertable: You can remove and replace them without powering off the switch or
disrupting switch functions.

Copyright © 2017, Juniper Networks, Inc.

74

OCX1100 Switch Hardware Guide

«
...
92
93
94
95
96
...
»

Summary of Contents for OCX1100













































































































































































































Reviews:

No comments

Related manuals for OCX1100

i-bus KNX IPR/S 3.5.1

Brand: ABB Pages: 44

Brand: IBM Pages: 4

Network Card-MS

Brand: Eaton Pages: 89

Brand: Lanpro Pages: 5

Brand: X-Micro Pages: 74

Brand: NETGEAR Pages: 14

EdgeLens INT10G8LR56

Brand: Garland Pages: 30

Proventia A1204

Brand: Internet Security Systems Pages: 42

EdgeRouter PoE ERPoe-5

Brand: Ubiquiti Pages: 13

Brand: National Instruments Pages: 80

Brand: l-com Pages: 2

Brand: Ciara Pages: 14

Modular Fast Fiber Switch Converter MT-RJ

Brand: Lindy Pages: 3

Brand: Quantum Pages: 108

Brand: Paradyne Pages: 46

CONNECT Box Pro

Brand: ratiotec Pages: 12

Brand: Panduit Pages: 5

Firebox T85-PoE

Brand: Watchguard Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands