Juniper OCX1100, Hardware Manual

Page: 34 / 204

Figure 6: LEDs on the Management Port and Console Port on an
OCX1100-48SX Switch
2— 1—
Status LED for
CONSOLE
port Link and activity LED for
MGMT
port
Table 8 on page 14 describes the link and activity LED on the management port.
Table 8: Link and Activity LED on the Management Port of an OCX1100-48SX Switch
State and Description Color LED
• On steadily—The port and the link are active, but there is no link activity.
• Blinking—The port and the link are active, and there is link activity.
• Off—The port is not active.
Green Link and activity
Table 9 on page 14 describes the status LED on the console port.
Table 9: Status LED on the Console Port of an OCX1100-48SX Switch
State and Description Color LED
• On steadily—Console on.
• Off—Console off.
Green Status
Related
Documentation
OCX1100 Switches Hardware Overview on page 3
•
•
Connecting a Device to a Network for Out-of-Band Management on page 85
SFP+ Port and QSFP+ Port LEDs on OCX1100 Switches
On an OCX1100 switch, each SFP+ port and QSFP+ port has one LED that shows the link
and activity of the port.
The following figures in this topic show the location of those LEDs:
• Figure 7 on page 15 shows the location of the LEDs on the SFP+ ports.
• Figure 8 on page 15 shows the location of the LEDs on the QSFP+ ports.
Copyright © 2017, Juniper Networks, Inc. 14
OCX1100 Switch Hardware Guide