Juniper OCX1100, Hardware Manual

Page: 90 / 204

Related
Documentation
Rack Requirements on page 35
•
•
Cabinet Requirements on page 36
•
Clearance Requirements for Airflow and Hardware Maintenance for OCX1100 Switches
on page 37
Mounting an OCX1100 Switch
You can mount an OCX1100 switch:
• On a desk or other level surface by using the rubber feet provided with the switch.
•
On four posts of a 19-in. rack or a 19-in. cabinet by using the mounting brackets provided
with the switch.
The holes in the mounting brackets are placed at 1 U (1.75 in. or 4.45 cm) apart so that
the switch can be mounted in any rack or cabinet that provides holes spaced at that
distance.
Related
Documentation
Mounting an OCX1100 Switch on a Desk or Other Level Surface on page 70
•
•
Mounting an OCX1100 Switch on Four Posts of a Rack or Cabinet on page 71
Mounting an OCX1100 Switch on a Desk or Other Level Surface
You can mount an OCX1100 switch on a desk or other level surface by using the four
rubber feet that are shipped with the switch. The rubber feet stabilize the chassis.
Before mounting the switch on a desk or other level surface:
•
Verify that the site meets the requirements described in “Site Preparation Checklist
for OCX1100 Switches” on page 31 .
• Place the desk in its permanent location, allowing adequate clearance for airflow and
maintenance, and secure it to the building structure.
•
Read “General Safety Guidelines and Warnings” on page 137 , with particular attention
to “Chassis Lifting Guidelines” on page 146 .
Ensure that you have the following parts and tools available:
•
Four rubber feet to stabilize the chassis on the a desk or other level surface (provided
in the accessory box in the switch carton)
To mount a switch on a desk or other level surface:
1.
Remove the switch from the shipping carton (see “Unpacking an OCX1100 Switch”
on page 65 ).
2.
Turn the chassis upside down on the desk or the level surface where you intend to
mount the switch.
Copyright © 2017, Juniper Networks, Inc. 70
OCX1100 Switch Hardware Guide