Juniper OCX1100, Hardware Manual

Page: 85 / 204

CHAPTER 9
Unpacking the Switch
• Unpacking an OCX1100 Switch on page 65
• Parts Inventory (Packing List) for an OCX1100 Switch on page 66
•
Registering Products—Mandatory for Validating SLAs on page 67
Unpacking an OCX1100 Switch
OCX1100 switches are shipped in a cardboard carton, secured with foam packing material.
The carton has an accessory compartment and contains the quick start instructions.
CAUTION: OCX1100 switches are maximally protected inside the shipping
carton. Do not unpack the switches until you are ready to begin installation.
To unpack the switch:
1.
Move the shipping carton to a staging area as close to the installation site as possible,
but where you have enough room to remove the system components.
2.
Position the carton so that the arrows are pointing up.
3.
Open the top flaps on the shipping carton.
4.
Pull out the packing material holding the switch in place.
5.
Verify the parts received against the inventory on the label attached to the carton.
See
“Parts Inventory (Packing List) for an OCX1100 Switch” on page 66 .
6.
Save the shipping carton and packing materials in case you need to move or ship the
switch later.
Related
Documentation
Installing and Connecting an OCX1100 Switch on page 69
•
•
Connecting and Configuring an OCX1100 Switch (CLI Procedure) on page 100
65 Copyright © 2017, Juniper Networks, Inc.