Juniper OCX1100, Hardware Manual

Page: 75 / 204

CHAPTER 8
Pinout Specifications
• Console Port Connector Pinout Information on page 55
• Mini-USB Port Pinout Specifications on page 56
•
RJ-45 Management Port Connector Pinout Information on page 56
•
RJ-45 to DB-9 Serial Port Adapter Pinout Information on page 57
• RJ-45 Port, QSFP+ Port, SFP+ Port, and SFP Port Connector Pinout
Information on page 58
Console Port Connector Pinout Information
The console port on a Junier Networks device is an RS-232 serial interface that uses an
RJ-45 connector to connect to a console management device. The default baud rate for
the console port is 9600 baud.
Table 33 on page 55 provides the pinout information for the RJ-45 console connector.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and you
want to connect your laptop or PC directly to a device, use a combination of
the RJ-45 to DB-9 female adapter and a USB to DB-9 male adapter. You
must provide the USB to DB-9 male adapter.
Table 33: Console Port Connector Pinout Information
Description Signal Pin
Request to send RTS Output 1
Data terminal ready DTR Output 2
Transmit data TxD Output 3
Signal ground Signal Ground 4
Signal ground Signal Ground 5
Receive data RxD Input 6
55 Copyright © 2017, Juniper Networks, Inc.