195
03.13 EN
CAUTION!
Risk of electrical system damage
Cleaning the assemblies (controllers, sensors, motors etc.) of the electronic system
with water can damage the electrical system.
X
Do not clean the electrical system with water.
X
Clean the electrical system with weak suction or compressed air (use a compressor
with a water trap) and not a conductive, anti-static brush.
Cleaning the electrical system assemblies
Requirements
– Prepare the truck for maintenance and repairs (see "Preparing the truck for
maintenance and repairs" on page 163).
Tools and Material Required
– Compressor with water separator
– Non-conductive, antistatic brush
Procedure
• Expose the electrical system, see "Opening the rear panel" on page 164.
• Clean the electrical system assemblies with weak suction or compressed air (use a
compressor with a water trap) and not a conductive, anti-static brush.
• Fit the electrical system panel, see "Opening the rear panel" on page 164.
• Carry out all the tasks in the section "Recommissioning the truck after cleaning or
maintenance work" (see "Restoring the truck to service after decommissioning" on
page 201).
The electrical system assemblies are now clean.
Summary of Contents for DFG 425s
