Jungheinrich DFG 425s, Operating Instructions Manual, Page: 165 / 229

03.13 EN
164
4.2 Lifting and jacking up the truck safely
WARNING!
A truck tipover can cause accidents
In order to raise the truck, use only suitable lifting gear at the points specially provided
for this purpose.
X Note the weight of the truck on the data plate.
X Always use a jack with a minimum capacity of 5000 kg kg.
X
Raise the unladen truck on a level surface.
X
When raising the truck, take appropriate measures to prevent it from slipping or
tipping over (e.g. wedges, wooden blocks).
Raising and jacking up the truck securely
Requirements
– Prepare the truck for maintenance and repairs (see "Preparing the truck for
maintenance and repairs" on page 163).
Tools and Material Required
– Jack
– Hard wooden blocks
Procedure
• Place the jack against the contact point.
Z
Jack contact point, see "Identification points and data plates" on page 30.
• Raise the truck.
• Support the truck with hard wooden blocks.
• Remove the jack.
The truck is now securely raised and jacked up.
4.3 Opening the rear panel
Opening the panel
Requirements
– Prepare the truck for maintenance and
repairs (see "Preparing the truck for
maintenance and repairs" on page 163).
Procedure
• Undo the two quick release fasteners (200).
• Pull the rear panel back and remove it.
The rear panel is now open. The fuses and
other electrical components can now be
reached.
200