Jungheinrich DFG 425s, Operating Instructions Manual, Page: 104 / 229

103
03.13 EN
4.17 Operating additional attachments for the MULTI-PILOT
WARNING!
Incorrect symbols can cause accidents
Symbols on controls that do not depict the function of the attachments can cause
accidents.
X Mark the controls with symbols that indicate their function.
X Specify the attachments’ direction of movement in accordance with ISO 3691-1 so
that they match the controls’ direction of movement.
4.17.1 MULTI-PILOT with control of ZH1 hydraulic port
Z
Depending on the attachments used the (150,
151) buttons are assigned the function of the
attachment. Unused buttons have no function. For
connections see "Fitting additional attachments"
on page 105.
Procedure
• Operating hydraulic port ZH1:
Press the (150) button or the (151) button.
The attachment performs its operation.
4.17.2 MULTI-PILOT with control of ZH1 and ZH2
hydraulic ports
Z
Depending on the attachments used the
buttons (150, 151) and the lever (78) are
assigned the function of the attachment. Levers
that are not required are void. For connections
see "Fitting additional attachments" on
page 105.
Procedure
• Operating hydraulic port ZH1:
Press the (150) button or the (151) button.
• Operating hydraulic port ZH2:
Set the MULTI-PILOT (78) to neutral and then
turn it clockwise or anti-clockwise while at the
same time pressing the button (85).
The attachment performs its operation.
150
151
150
151
78
85