03.13 EN
178
4.9.3 Replacing the fuel filter
NOTE
Fuel can cause environmental damage
X
Bind any spilled diesel fuel using
suitable absorbing agents.
X
Dispose of the absorbed diesel fuel and
the fuel filter in accordance with the
relevant environmental protection laws.
– Mark the fuel hoses (219) and loosen the
clamps (218) from the fuel filter. Remove
the cotter pin and take off the return lines.
– Slacken the collar screw (220) and take
off the fuel filter (221).
– Fill the new fuel filter entirely with clean
diesel and fit it with the collar screw (220).
– Reconnect the fuel hoses and tighten
them with clamps or the cotter pin.
4.9.4 Check V-belt for damage
Procedure
• Check the V-belt (222) for cracks,
deformation and wear.
NOTE
A damaged V-belt will result in
malfunctions.
X
If the V-belt is not in a suitable condition,
you must only start to use the truck when
the damage has been rectified.
219
218
219
220
221
222
Summary of Contents for DFG 425s
