181
03.13 EN
Adding engine oil
Procedure
• Add fresh engine oil (see "Consumables" on
page 161) through the filler port (210).
• Check the engine oil level with the dipstick
(214) and top up if necessary.
• Screw the filler cap back on.
• Attach the floor plate.
NOTE
The incorrect amount of oil will damage
the engine.
X
After replacing the oil and oil filter carry
out a test run and check the oil pressure
display (88).
X
Check that the oil drain plug and oil filter
housing are tight.
4.9.6 Replacing spark plugs
Procedure
• Remove spark plug connector (224).
• Thoroughly clean around the spark plugs on
the cylinder head.
• Unscrew the spark plugs.
• Check the electrode distance of the new
spark plugs with a feeler gauge.
Z
Rated value: 1.0 mm ± 0.1mm.
• Screw in the spark plugs by hand and then
torque them to 25 Nm.
210
214
km/h
R
88
224
Summary of Contents for DFG 425s
