Jungheinrich DFG 425s, Operating Instructions Manual, Page: 216 / 229

215
03.13 EN
Video system
Weigher sensors / switches
Weather-proof system
Wiper/washer system
Fork adjuster
System Components W A B C
1 Check wiring is secure and check for damage.
t
2 Test the camera, make sure it is secured and clean.
t
3 Test the monitor, make sure it is secured and clean.
t
Electrical System W A B C
1 Test weigher system and check for damage.
t
Electrical System W A B C
1 Check fuse ratings.
t
Chassis and Superstructure W A B C
1 Test the window heating and check for damage.
t
2 Test the doors and check for damage.
t
Chassis and Superstructure W A B C
1
Check wiper water container for leaks and check volume, top up if
necessary.
t
2 Test windscreen wipers and check for damage, replace if necessary.
t
Hydraulic operations W A B C
1 Check axial play of the front and rear rollers and adjust if necessary.
t
2
Check attachment is properly secured to the truck and the
supporting elements.
t
3 Test attachment, check settings and check for damage.
t
4 Check sliding blocks are complete.
t
5
Check attachment bearing points, guides and stops for wear and
damage, grease and clean these components.
t
6 Check attachment lubrication; clean and lubricate if necessary.
t
7 Check hydraulic ports and tighten if necessary.
t
8 Test the fork positioner and check for damage.
t
9 Check cylinder seals.
t
10 Check cylinder piston rods and bushings.
t