03.13 EN
94
Positioning the forks with an integrated fork
positioner (option)
CAUTION!
Do not use the fork positioner to clamp
loads.
Requirements
– Truck prepared for operation, see "Preparing
the truck for operation" on page 76.
Procedure
• Press the toggle switch (149) and at the same time pull the SOLO-PILOT (146) in
direction Z: the forks will move towards each other.
• Press the toggle switch (149) and at the same time push the SOLO-PILOT (146) in
direction A: the forks will spread apart.
The forks are now positioned.
Synchronising the alignment of the fork tines
with an integrated fork positioner (optional
equipment)
Requirements
– Truck prepared for operation, see "Preparing
the truck for operation" on page 76.
– The fork tines are no longer aligned.
Procedure
• Press the toggle switch (149) and at the same
time push the SOLO-PILOT (146) in direction A and spread the fork tines apart as
far as they will go.
• Press the toggle switch (149) and at the same time pull the SOLO-PILOT (146) in
direction Z and bring the fork tines as close to each other as they will go.
The fork tines are now synchronised.
Z
When the limit position for the operation has been reached (there will be a noise
from the pressure relief valve) release the lever. The lever will revert automatically
to neutral.
A
Z
149
146
A
Z
149
146
Summary of Contents for DFG 425s
